 ERIBAFOLK POP UP EVERYWHERE |
|
Hi
Bought a Eriba Puck L from 2002. It looked ok, but now i find moisture problems. Behind the Fridge and some spots in the floor. Below the right front light, below the fridge, below the doorframe. Parts of the floor have deteriorated. See pictures
I intend to remove the bad parts, use wood hardener, impregnate the wood and rusty metal and paint the metal with Hammerite. Any other suggestions?
To remove the source of the problems I intend to renew the caulking on various parts of the Puck.
Between the floor and the metalframe there is a white-grey cauking, it closes partly the gap between the metal and the floor. Is this correct?
Am I on the right track?
thanks
John
replyRE: advice needed with moisture
in Improving your pride and joy and how to fix things Mon Nov 21, 2016 7:01 pmby Randa france •
| 13.439 Posts
Hi John.
There are a number of people on here who are more au-fait with the floor and perimeter framework of an Eriba than I am but it does look as though your Puck L has had a bit of a life especially as it's a 2002 van.
Did you buy it privately or from a dealers?
Firstly, I'm not sure what the round tubes shown in photo 1 and photo 3 are. I'm sure I've not seen them under my Troll 
As for the floor, it looks like someone has painted it with silver paint which will hold moisture in. I seem to remember someone on here advising not to paint the wooden floor.
Randa
1999 Eriba Troll 530 pushing a VW Touran 2L TDi Match
| « Sidney Powell responds after Trump campaign says she is not part of legal team: | nemesis ultra wheel lock » |
 Visitors
0 Members and 30 Guests are online. |
 Board Statistics
The forum has 13051
topics
and
108915
posts.
|
Forum-Chat
0
