Hi, I have two new unused corner steadies that I no longer need (hopefully!). Already fitted two to my Troll 550GT, 2003. Fitting was a bit fiddly as the geometry at the inboard end is very slightly different than the original. The mounting locations all line up correctly however I had to reverse the orientation of the bolt at the inboard end otherwise it fouled the end of the corner steady screw. Anyway works fine if you do that. Heavy duty good quality steadies with swivel foot. I've measured the two front mounting holes as 185mm apart and the perpendicular distance from a centre line through these two holes to the rear end mounting slot as 455mm. If you need any other dimensions please let me know. £30 each and collection from Ramsgate or I can quote for postage for 1 or both. Photo 30-04-2018, 16 48 30.jpg - Bild entfernt (keine Rechte)Photo 30-04-2018, 16 48 52.jpg - Bild entfernt (keine Rechte)Photo 30-04-2018, 16 49 46.jpg - Bild entfernt (keine Rechte)Photo 30-04-2018, 16 50 03.jpg - Bild entfernt (keine Rechte)