CRIS Registration RFID chip

ERIBAFOLK POP UP EVERYWHERE
Portal Forum Login Register Map

Welcome to new members � Hi. Please take a couple of minutes to say hello here �

CRIS Registration RFID chip

in Hi. Please take a couple of minutes to say hello here Sat Feb 20, 2021 12:42 pm
by Den 542 (deleted)

Hi everyone purchased a new Eriba 542 60 edition in 2020 only used once for a week great little van, just got the CRIS Registration kit but stuck where to fix the RFID chip? It Should be inside the van but not covered by any metal!! Easy on Uk vans because they have GRP front and rear panels so inside a locker fine, Eribas are all metal. Help any thoughts would be appreciated
Thanks in anticipation Den

Last edited Sat Feb 20, 2021 1:45 pm | Scroll up

RE: CRIS Registration RFID chip

in Hi. Please take a couple of minutes to say hello here Sat Feb 20, 2021 12:56 pm
by Stevejoyce (deleted)

pm sent

Triton 420 towed by a Ford Kuga 2.0 TDCi

RE: CRIS Registration RFID chip

in Hi. Please take a couple of minutes to say hello here Sat Feb 20, 2021 12:56 pm
by eribaMotters •

| 5.600 Posts

In the rear corners of the top lockers at the back of the van are a couple of small panels held in place with 2 screws. If you undo these you have access to the internal corner lights. You could double sided tape the RFID chip onto the back of this panel or onto the internal timberwork. The only thing between it and the outside would be the grp roof.

Colin

ps - welcome to the forum

aka Oscar - Audi A3 1.5 petrol _ ex 430, 552, camplet trailer tent, 310, now a nice white 2017 430.

likes this post!

Last edited Sat Feb 20, 2021 12:57 pm | Scroll up