Forum - Improving your pride and joy and how to fix things

ERIBAFOLK POP UP EVERYWHERE
Portal Forum Login Register Map

Repairs, maintenance and accessories � Improving your pride and joy and how to fix things �

Project for spring

Page 1 of 2 � previous Page 1 2 next Page �

Project for spring

in Improving your pride and joy and how to fix things Fri Jan 07, 2022 4:30 pm
by Erik (deleted)

This year I will be adding the higher awning rail,
parts to be ordered
2800 awning rail
sikaflex 221
siklastomer 710
stainless screws
sika 208 cleaner
paper towell
sand paper
soon as it warms up I start.......will post pics as i go.

Randa france, and like this post!

RE: Project for spring

in Improving your pride and joy and how to fix things Sat Jan 08, 2022 12:42 pm
by dranddad (deleted)

Be watching with interest

https://photos.app.goo.gl/J8hNHGkcie1QFnbc7

RE: Project for spring

in Improving your pride and joy and how to fix things Mon Jan 10, 2022 4:55 pm
by Erik (deleted)

thinking about the side rails now, is it a good idea to make up a pair of sockets out of these parts and slinding them into the awning rail so the pressure is taken on roof structure,

RE: Project for spring

in Improving your pride and joy and how to fix things Mon Jan 10, 2022 4:59 pm
by eribaMotters •

| 5.600 Posts

I don't understand. I thought you were planning on fitting a higher awning rail.

Colin

Forum Moderator. aka Oscar - Audi A3 1.5 petrol _ ex 430, 552, camplet trailer tent, 310, now a nice white 2017 430.

RE: Project for spring

in Improving your pride and joy and how to fix things Tue Jan 11, 2022 10:06 am
by Erik (deleted)

er4.jpg - Bild entfernt (keine Rechte)er3.jpg - Bild entfernt (keine Rechte)er4.jpg - Bild entfernt (keine Rechte)i am fitting the higher rail, just wondered if this would stop any slipping of the awning feet, also the height i set the rail from the awning rail, the 125mm mearurement that you said made the feet not sit properly against the roof, using these sockets slid into the rail might help eliviate the problem.

Last edited Tue Jan 11, 2022 10:15 am | Scroll up

RE: Project for spring

in Improving your pride and joy and how to fix things Tue Jan 11, 2022 10:32 am
by eribaMotters •

| 5.600 Posts

You will definitely need the thumbscrew end stops. When I made mine I used a small slotted zinc plated screw instead, but I've now replaced this with a stubby stainless allen headed grub screw.
Your idea on the socket pads is a great one. You could fix these to a length of awning cord and just slide into place. The 125mm would then not be critical. You might however need to pop the extending roof rafter apart and drill another indexing hole as the extended length would be a fair bit shorter and not marry up with one of the factory holes.

Colin

Forum Moderator. aka Oscar - Audi A3 1.5 petrol _ ex 430, 552, camplet trailer tent, 310, now a nice white 2017 430.

Last edited Thu Jan 13, 2022 8:47 am | Scroll up

RE: Project for spring

in Improving your pride and joy and how to fix things Tue Jan 11, 2022 11:21 am
by Erik (deleted)

yes, the extra hole is a valid point not to be taken lightly, thankyou for the input.
regards john

RE: Project for spring

in Improving your pride and joy and how to fix things Wed Jan 12, 2022 3:42 pm
by Erik (deleted)

rail as arriveder5.jpg - Bild entfernt (keine Rechte)

Randa france likes this post!

RE: Project for spring

in Improving your pride and joy and how to fix things Wed Jan 12, 2022 4:38 pm
by Frantone •

| 112 Posts

Erik, is that one long piece or sections?

Eriba Troll 540GT. 2019. Our sixth Eriba! Loved them all.

#10

RE: Project for spring

in Improving your pride and joy and how to fix things Wed Jan 12, 2022 4:58 pm
by eribaMotters •

| 5.600 Posts

Erik, that does not look correct. The C channel should be sitting so it projects out from the back plate not sitting on top. It could well cut into the awning bag over a short time. I used something like this https://www.homesteadcaravans.co.uk/acce...awning-rail.htm and managed to source it in 3m lengths on both occasions.

IMG_2058-800.jpg - Bild entfernt (keine Rechte)7-800.jpg - Bild entfernt (keine Rechte)

Colin

Forum Moderator. aka Oscar - Audi A3 1.5 petrol _ ex 430, 552, camplet trailer tent, 310, now a nice white 2017 430.

mr_underhill likes this post!

Last edited Wed Jan 12, 2022 4:59 pm | Scroll up

#11

RE: Project for spring

in Improving your pride and joy and how to fix things Thu Jan 13, 2022 10:52 am
by Erik (deleted)

Yes 2800 mm long

Frantone likes this post!

#12

RE: Project for spring

in Improving your pride and joy and how to fix things Thu Jan 13, 2022 11:16 am
by Erik (deleted)

Hello Colin, I did look at that, and the angle of the rail will be fine if not perfect so long as you put it the right way around or upside down, I suppose I will fit it upside down with the screws on top so the slot follows the slope of th roof. more stuff arrived today and again thankyou for all the knowledge you have passed on, when i look back on previous posts you where the pioneer of the high altitude rail.IMG_20220112_154705.jpg - Bild entfernt (keine Rechte)

eribaMotters likes this post!