AD9087C2-9679-4BF8-9027-707EB057EFF0.jpeg - Bild entfernt (keine Rechte)Hi all
Need help with rewiring 13 pin plug after a small “incident” en route to current site
Currently on site and hoping to return home on Monday
I have bought new plug and have wired it as follows
1 Yellow 2 Blue 3White 4 Green 5 Brownish 6 Red 7 Black 9 Orange
I am left with four cables: Bkue and white; green and white; blue and yellowish and red and yellowish
Obviously I’m left with pins 8,10,11,12 and 13
Any help much appreciated
Van is 2001 triton I assume with originAl cable

Western Towing https://www.westerntowing.co.uk/caravan-...n-wiring-chart/ list the colours as:

8 is reversing lights (Pink 1.5 size)
10 is Ignition controlled power (Grey 2.5 size)
11 Return (earth) for cable 10 (white/black 2.5)
12 coding for coupled trailer (white/blue 1.5)
13 Return (earth) for cable 9 (white/red 2.5)

Which suggests that in 2002 Cernay were using a different wiring convention.

https://www.eribaforum.co.uk/eriba%20amiga/otr_towbar.html

Thanks Andy
I found this one as well but it doesn’t match the coloured cables I have Left over
Just found another web site that suggests all the same solid colours in same order except orange goes into 8
Then green/white and blue/white into 13 and 11 respectively
Leaving the blue/yellow and red/ yellow which it describes as blue brown and red brown to match to 9 and 10
Looks about right also cable colours and dimensions seem to match
I’d be a bit happier if someone could confirm before I plug it in, though!

Quote: Ianrow wrote in post #3

---

I’d be a bit happier if someone could confirm before I plug it in.

---