i recently picked up a 68 puck and looking to replace the wheel on my tongue jack, only because its clearly not correct.. its worn out, axle/pin is to small and the wheel is clearly to small..

anyone have a good replacement source online?

( i realize there are many chinese wheels on amazon and the like)
unnamed-1.jpg - Bild entfernt (keine Rechte)unnamed-2.jpg - Bild entfernt (keine Rechte)

thanks

Wenn Sie hier auf Links zu eBay klicken und einen Kauf tätigen, kann dies dazu führen, dass diese Website eine Provision erhält.

Measure the diameter of the jockey wheel stem, something like 48mm and you can get a complete new one for around £25. Loads on eBay.

What size is the hole diameter on the forks? I have an original Eriba axle pin you are welcome to have for free - if it fits!

The pin I have is 20mm diameter. And 84mm long overall - 80mm to the bottom of the retaining lug.

Simon

thanks for the replies... im in the US if you havent noticed.

youve never heard of tongue jack, ive never heard of jockey.
i will measure and post up more info..


Screenshot 2024-09-29 at 1.09.11?PM.png - Bild entfernt (keine Rechte)

that appears to be the correct diameter!

would you ship to USA ill pay.


my pin diameter is 20.3mm and the width is aprox. 52mm between the forks.. (looks to be bent some)

Hi Carl,
I've tried to send you a PM with my contact email - not sure if I can get one as you are new... If no message, then we'll have to work out another way to message, without putting our details in clear

Simon

message received and replied.