We've got an 16 inch avtex TV and wondered if anyone could suggest mounting it somewhere freeing up the worktops?

Thinking of doing it, but gave up as I'm not practical enough. Someone in here no doubt will help. Good luck

A previous owner of my old Puck made this small shelf unit .....to, I suspect cover and make use of what I think was the holes left where a wall mounted tv bracket used to be.

Space as you say is very limited in a Puck and the side of the wardrobe is the obvious place, if you don't want to drill holes in the wall consider something that will hook over the top of the wardrobe after the pop top is raised.


P1300098.JPG - Bild entfernt (keine Rechte)

I dont like putting holes in the wood as it has to be supported from behind somehow as the woodwork isn't very dense. My old puck must of had a small telly on the side of the wardrobe as it was full of holes..

This idea in the video at 5mins 58 seconds is novel, he has suspended a pole from the poptop..

Interesting layout on that one John, its what we call the blind puck (no windows at the front) not seen inside one before.

I've seen that footage on YouTube it looks a good idea but cannot make my mind up whether or not he has screwed it to the poptop metal rim. Maybe something similar using clamps!

Zitat

---

cannot make my mind up whether or not he has screwed it to the poptop metal rim.

---

Looks like it just hooks over to me.