#1

Table bracket to mount onto aluminium profile

in Anything Eriba-related Sun Apr 22, 2018 9:33 pm
by swa49 (deleted)
avatar

Hello, just a quick one. I'd like to buy, make or adapt a table to use outside the van, using the existing aluminium rail above the wheel. One option is to buy a proper Eriba table, but if I wanted to make my own, where would I buy the correct bracket?

Thanks.


Triton 430GT + Golf mk7 2.0TDi DSG
Scroll up

#2

RE: Table bracket to mount onto aluminium profile

in Anything Eriba-related Sun Apr 22, 2018 10:26 pm
by eribaMotters | 5.605 Posts

I posted some of this a month or so ago:-

"a route taken by several owners involves a trip to the local diy shed and finding a kitchen door that matches or contrasts with your interior colours. The trim on the edge of the original table can be bought from caravan dealers as it is not Hymer/Eriba specific. I'm not sure if this is the one as photo is poor https://www.leisureshopdirect.com/carava...ble-strip-beige
Folding legs are also available.I made a table up some years ago that I use on the outside rail to support a table top fridge and table top freezer. I bought matt white formica and bonded to good quality wbp birch plywood. I varnished the edges and then routed the edge before fitting the table edge trim and an adapted IKEA table leg. The bottom of the leg was adapted by fitting in an under kitchen cupboard leg that could be screwed up and down for adjustment"

Colin


Skoda Yeti diesel 2wd _ ex 430, 552, camplet trailer tent, 310, now a nice white 2017 430.
Scroll up

#3

RE: Table bracket to mount onto aluminium profile

in Anything Eriba-related Mon Apr 23, 2018 5:52 pm
by swa49 (deleted)
avatar

Thanks Colin. Thought I'd seen reference to the bracket somewhere, but my search words didn't locate your post.


Triton 430GT + Golf mk7 2.0TDi DSG
Scroll up


Visitors
1 Member and 88 Guests are online.

Board Statistics
The forum has 12892 topics and 108084 posts.



disconnected Forum-Chat Members online 1