Hi all, we’re about to take delivery of an Eriba Triton 430 from adventure Leisure Vehicles – first time owners! Can anyone advise what size flexible pipe and fitting are needed to connect the waste outlet to an external container? Thanks in advance, Jake.

Thanks Colin. We have been given a Wastemaster waste water carrier, which has a rather small opening, and was wondering the best way to connect a pipe to it.

Quote: Randa france wrote in post #4

---

Perhaps for the Westminster get a piece about 700mm long and cut to length?

Randa

---

Hi Jake, we use a short length of bicycle innertube which fits perfectly over the outlet and can be left in place when travelling.

I made up this from a bit of 36mm waste pipe and 36mm connector with a bit of foam around the inside to hold it firmly to the drain outlet.
it stores nicely in the handle of our waste jerrycan so it doesn't get lost.

IMGP1500.JPG - Bild entfernt (keine Rechte)

I did something similar: a bit of 40mm waste pipe with a £1.30 rubber soil pipe boss that slides up or down to give the correct height between the van outlet and the neck of the waste tank.

This method still enables the dimpled recess in the waste tank to fill with overflow when its full to let me know when it needs emptying

Thank you all for the suggestions. Sounds like something flexible/rubbery with an internal diameter of ~32mm should fit around the Eriba outlet.

I bought a short flexible waste extension for Colplaz and trimmed off the larger diameter section.
https://colapz.co.uk/collections/all-pro...te-pipe-adaptor

It fits neatly into this waste tank, although I didn't buy mine from Go Outdoors.
https://www.gooutdoors.co.uk/15900064/gr...-litre-15900064

Hope this helps.


Alan

Thanks Alan.