Thanks both, we have thought about the locker under the bed option if a key on/off is needed but not just inside the door. Under the bed is probably the way for us to go for easier access

… but I’ve never needed one on site and so don’t want to carry another 40kg or so of ironmongery just to get out of the drive.🙂
(Reply to post #10)

It’s a personal choice, obviously but worth mentioning the pro’s and cons for each.

Yann damaged his achilles tendon pushing Betty on wet grass once and when I push, nothing happens at all. We figure that having the mover will allow us to keep her for many more years than if we had to push.

Good point! … and I reserve the right to change my mind as and when it gets too difficult.
🙂🙂

I have just fitted a remote switch for our mover. I replaced the key switch with a relay, and ran the control cable under the seating around the back and behind the fridge which made for a neat job. The cable I used was bigger than required as this is what I had, but in the event of reverting to the original configuration, this could be used for a USB module instead. Also ran a small lead back to an existing negative connection under the seat for the LED earth.

The main issue with the location of the original switch is that the awning is usually in the way so you have to shuffle things about to access the switch. The new position will make things a lot easier.

moverswitch.jpg - Bild entfernt (keine Rechte)

Hi all when the mover is fitted I take it by looking at pictures the fitter will need to remove the metal mud guards?

Has anyone had a power touch evolution manual installed on a Troll if so what model and what brackets were required?

Cheers Dave

Message for your post JohnE, could you tell me the length of the cable on the remote switch, just wondering if its long enough to go around the van, or do you run it under?