Alloy Wheels for Troll
Alloy Wheels for Troll
in Anything Eriba-related Sun Jul 30, 2017 1:00 pmby Colin Sterland (deleted)
Can anyone please help me to locate replacement alloy wheels for my 2006 Eriba Troll. While returning home from holiday yesterday we had a tyre blow out which resulted in badly damaging our wheel.
RE: Alloy Wheels for Troll
in Anything Eriba-related Sun Jul 30, 2017 2:07 pmby thecolliss • | 137 Posts
Difficult I think, AL or Jandi may be able to help.Nothing on EBAY...
For the future ref,I have fitted Tyron Bands which following blow out allow you to run flat to a garage @ 30mph max
RE: Alloy Wheels for Troll
in Anything Eriba-related Sun Jul 30, 2017 3:18 pmby gattim (deleted)
www.caravanreifen.de
look under Hymer - I don't think they do an exact match for the ones you probably have, but they do ones for the later models, maybe you could buy two and keep your original for a spare?
RE: Alloy Wheels for Troll
in Anything Eriba-related Sun Jul 30, 2017 3:56 pmby eribaMotters • | 5.585 Posts
If you can match the size and load rating up then this may be worth having a look at.
2 x new alloys [shipped from Germany] will cost you less than 1 x original.
You may find you can get a pattern to match your car.
I used them a few years ago for steel rims and winter tyres for my Yeti. Price was far cheaper than anybody else and they arrived within a few days.
Colin
Skoda Yeti diesel 2wd _ ex 430, 552, camplet trailer tent, 310, now a nice new white 430.
RE: Alloy Wheels for Troll
in Anything Eriba-related Sun Jul 30, 2017 4:56 pmby Pepé Le Pew • | 2.752 Posts
Quote: Colin Sterland wrote in post #1If your alloys are the same as these on the AL website, then they are almost certainly Intra 6044W5s.
Can anyone please help me to locate replacement alloy wheels for my 2006 Eriba Troll. While returning home from holiday yesterday we had a tyre blow out which resulted in badly damaging our wheel.
Caravanreifen do sell them, but they seem to be out of stock at the moment.
I think I might e-mail Caravanreifen's owner, Gunnar Braasch, and ask him. I've bought Troll alloys (the later five-spoke type) from him, and he's a very helpful chap.
You never know - since most people want a pair of wheels, he might just have a single one knocking around in a corner somewhere.
Nothing ventured, nothing gained...
.
RF18-668/2
RE: Alloy Wheels for Troll
in Anything Eriba-related Sun Jul 30, 2017 5:12 pmby Ray Lawrence • | 671 Posts
Personally, I wouldn't worry too much about matching the design as long as the size and fitting was correct. I have a short memory and wouldn't be able to remember the design by the time I'd walked round to the other side. You can't see both sides at once
2007 Triton 430GT - Seat Ateca 1.4TSI petrol manual
RE: Alloy Wheels for Troll
in Anything Eriba-related Sun Jul 30, 2017 6:11 pmby Tomored • | 2.129 Posts
Quote: Ray Lawrence wrote in post #7
Personally, I wouldn't worry too much about matching the design as long as the size and fitting was correct. I have a short memory and wouldn't be able to remember the design by the time I'd walked round to the other side. You can't see both sides at once
Funny you should say that but I have two different wheel covers on my steel wheels using the same logic, you can't see both sides at the same time, no one one has ever commented.
The only way to have a friend, Is to be one
« Sidney Powell responds after Trump campaign says she is not part of legal team: | An embarrassing thread... » |
Visitors
1 Member and 26 Guests are online. |
Board Statistics
The forum has 12871
topics
and
107945
posts.
|