in Anything Eriba-related
Thu Jul 28, 2022 10:56 am
by
PhilipM
• | 208 Posts
Me too. I need to know do we need 1 x LS100 and 1 x LS200 or 2 x LS200? The LS100 causes a smaller blockage on the top vent as it is supposed to have more ventilation in the top right corner. However, this does not seem to exist on the Eriba.
in Anything Eriba-related
Thu Jul 28, 2022 11:41 am
by
Steamdrivenandy
• | 1.049 Posts
The top right hand corner is where the flue tube from the gas burner exits. Blocking that could lead to CO production by the burner and death through carbon monoxide poisoning.
I had nothing to do on this hot afternoon But to settle down and write you a line
in Anything Eriba-related
Fri Jul 29, 2022 6:05 pm
by
Bathchap
• | 52 Posts
Whilst no dedicated exit point I thought you still needed the smaller cover on the top vent to allow the gas fumes to exhaust so you would need a LS100 and a LS200?
in Anything Eriba-related
Mon Jan 08, 2024 9:56 am
by
Steamdrivenandy
• | 1.049 Posts
Quote: 2eZero wrote in post #22Are these LS100 and LS200 what I need for a 2018 530 too please? ;)
I use mine all year around. I'm actually off out next week up to Cumbria for a few days....
AFAIK the same exterior vent fins have been fitted to all except Pucks for decades, except the Troll 535 and 560 plus the new 6XX models. with their tall compressor fridges, rather than the absorption under counter ones.
I had nothing to do on this hot afternoon But to settle down and write you a line
Skoda Karoq 1.5 Petrol DSG and a 420. A Bailey Phoenix + 420, with oven, microwave, shower cubicle, solar panel, ATC and external gas point.