#31

RE: Awning fitting help please!

in Anything Eriba-related Mon Aug 17, 2015 1:46 pm
by Aaron Calder | 3.834 Posts

Congratulations!

It all looks pretty damned good to me and it won't now slip and possibly damage the van.

Well done.


Forum Administrator
2003 Triton 420 and Audi A4 2.0Tfsi S-line SE Cabriolet


Last edited Tue Aug 01, 2017 12:57 pm | Scroll up

#32

RE: Awning fitting help please!

in Anything Eriba-related Mon Aug 17, 2015 3:53 pm
by Deeps (deleted)
avatar

Sarah - I would recommend that you obtain a rain cowl (or two) - essential for the spike nearest the caravan to prevent rain water running down the spike/poles and into the awning. The spikes at the front aren't too critical as they are located outside of the main awning living area although it wouldn't do any harm to fit the cowls on these spikes also.
Fit the rain cowl over the back spike at the early stage of erecting the awning because once it's up you won't have access to the spike unless your pop-up roof has a ventilation window (ours does) which allows you access to it later.

The link is simply by way of illustrative example http://caravanalia.com/product/rain-cowl/361


2013 Triton 430, VW Touran TDI BM


Aaron Calder and like this post!
Last edited Mon Aug 17, 2015 3:54 pm | Scroll up

#33

RE: Awning fitting help please!

in Anything Eriba-related Mon Aug 17, 2015 4:21 pm
by Frantone (deleted)
avatar

Rain cowls......image.jpg - Bild entfernt (keine Rechte)

They go over the exposed ends of the awning poles outside the fabric.


Troll gently nudging up against Galaxy.


Aaron Calder likes this post!
Last edited Tue Aug 01, 2017 12:58 pm | Scroll up

#34

RE: Awning fitting help please!

in Anything Eriba-related Mon Aug 17, 2015 5:33 pm
by Aaron Calder | 3.834 Posts

Well thank you, kind sirs!

I've got an unopened pack of them with my awning and hadn't a clue what they were used for.


Forum Administrator
2003 Triton 420 and Audi A4 2.0Tfsi S-line SE Cabriolet


Last edited Tue Aug 01, 2017 12:58 pm | Scroll up

#35

RE: Awning fitting help please!

in Anything Eriba-related Mon Aug 17, 2015 5:39 pm
by Frantone (deleted)
avatar

They should be a tight fit onto the spokes and will then deflect rain water away from the hole itself.
In the case of Van der Horn type awnings with the central rear vertical piece the cowl has to be put on from inside the van through the side ventilation mesh.


Troll gently nudging up against Galaxy.


Last edited Tue Aug 01, 2017 12:58 pm | Scroll up

#36

RE: Awning fitting help please!

in Anything Eriba-related Mon Aug 17, 2015 6:08 pm
by Pepé Le Pew | 2.752 Posts

Quote: Aaron Calder wrote in post #34
I've got an unopened pack of them with my awning and hadn't a clue what they were used for.
I ordered some burlesque tassels to tie on ours.

I was hopeful, but it turned out I'd put all my basques in one exit.

My life is littered with things that seemed like a good idea at the time...

.



likes this post!
Last edited Mon Aug 17, 2015 6:27 pm | Scroll up

#37

RE: Awning fitting help please!

in Anything Eriba-related Mon Aug 17, 2015 9:17 pm
by Ribski | 1.468 Posts

Burlesque "pasties" ! !


Pepé Le Pew likes this post!
Scroll up

#38

RE: Awning fitting help please!

in Anything Eriba-related Mon Aug 17, 2015 9:32 pm
by Pepé Le Pew | 2.752 Posts

Quote: Ribski wrote in post #37
Burlesque "pasties" ! !
Phew!

What a relief!

Thank you, Martin

I was wandering alone in the wilderness with nothing but tumbleweed for company

.


Ribski likes this post!
Scroll up

#39

RE: Awning fitting help please!

in Anything Eriba-related Mon Aug 17, 2015 9:56 pm
by victoriana (deleted)
avatar

Blimey all this talk of burlesque is a bit to risky for me.
Think I will go to another forum. Perhaps to do with tetra neon fish . Not that I like them or anything .


Ribski likes this post!
Scroll up

#40

RE: Awning fitting help please!

in Anything Eriba-related Mon Aug 17, 2015 10:03 pm
by Randa france | 13.283 Posts

Quote: A guest wrote in post #39
Blimey all this talk of burlesque is a bit to risky for me.
Think I will go to another forum. Perhaps to do with tetra neon fish . Not that I like them or anything .

That will do you no good at all. Full of kissing goramies, tiger barbs and sucking loaches

Randa


1999 Eriba Troll 530 pushing a VW Touran 2L TDi Match


Last edited Tue Aug 01, 2017 12:58 pm | Scroll up

#41

RE: Awning fitting help please!

in Anything Eriba-related Mon Aug 24, 2015 11:25 am
by Sarah J (deleted)
avatar

Good news! Look what I picked up from AL on Saturday!

image.jpg - Bild entfernt (keine Rechte)

Now all I need is to fill all the holes left in the awning rail from the Omnistor sun canopy brackets......anybody know what type of filler would be best for this job? Am thinking some kind of rubberised sealant so it remains flexible but water resistant? Should I fill the hole in the rail with sealant then plug with a screw also?

I really don't want any water ingress on my lovely little Puck!!!!

Sarah


Scroll up

#42

RE: Awning fitting help please!

in Anything Eriba-related Mon Aug 24, 2015 12:29 pm
by hob (deleted)

Forum moderator
Vauxhall Insignia Sri towing 2006 Triton 430 import
Scroll up

#43

RE: Awning fitting help please!

in Anything Eriba-related Mon Aug 24, 2015 12:43 pm
by Sarah J (deleted)
avatar

Brilliant, thanks Hob


Scroll up

#44

RE: Awning fitting help please!

in Anything Eriba-related Mon Aug 24, 2015 2:10 pm
by Frantone (deleted)
avatar

Does this awning bracket need spacers behind it like the others???


Troll gently nudging up against Galaxy.


Last edited Tue Aug 01, 2017 12:59 pm | Scroll up

#45

RE: Awning fitting help please!

in Anything Eriba-related Mon Aug 24, 2015 3:45 pm
by Sarah J (deleted)
avatar

Spacers??? Arrrgh have I missed something?!


Scroll up


Visitors
1 Member and 55 Guests are online.

Board Statistics
The forum has 12891 topics and 108065 posts.



disconnected Forum-Chat Members online 1