#1

Where to put external socket on puck?

in Improving your pride and joy and how to fix things Sun Aug 15, 2021 10:33 am
by Paull (deleted)
avatar

I have just got my 1995 puck and I want to fit a external power socket. Where is a good place?

I was thinking either front corner or just aft of the table bracket under the seat.

Also, is there a frame diagram of where not to cut/drill?

Thanks for any advice.


Scroll up
replyreply

#2

RE: Where to put external socket on puck?

in Improving your pride and joy and how to fix things Sun Aug 15, 2021 12:11 pm
by eribaMotters • | 5.632 Posts

Welcome Paul. Another alternative is fitting the socket under the van. This is easier and just as useful. Have a look here, picture 6. 2017 Triton 430 - extras and modifications I sourced mine from Screwfix, I think, although similar grades are commonly available form the likes of Toolstation etc.

Colin

aka Oscar - Audi A3 1.5 petrol _ ex 430, 552, camplet trailer tent, 310, now a nice white 2017 430.
Scroll up
replyreply

#3

RE: Where to put external socket on puck?

in Improving your pride and joy and how to fix things Sun Aug 15, 2021 1:10 pm
by Randa france • | 13.342 Posts
Wenn Sie hier auf Links zu eBay klicken und einen Kauf tätigen, kann dies dazu führen, dass diese Website eine Provision erhält.

Or of course you could get a splitter and a camping fused bank of sockets.
That's the way we went as we already had the camping sockets.

A splitter Werbung: https://www.ebay.co.uk/itm/Mains-2-Way-C...MhoCGV8QAvD_BwE is placed in line with your EHU cable and you'll need another short piece of cable from splitter to van. The splitter can then sit under the van to protect against the weather.

A camping fused bank https://www.amazon.co.uk/Maypole-MP3765-...9029284&sr=8-19 is plugged into the third socket of the splitter and again the fused bank can be put under the van.

Randa

The following contents have been linked to this post:

ERIBAFOLK POP UP EVERYWHERE 1999 Eriba Troll 530 pushing a VW Touran 2L TDi Match


likes this post!
Last edited Sun Aug 15, 2021 1:11 pm | Scroll up
replyreply

#4

RE: Where to put external socket on puck?

in Improving your pride and joy and how to fix things Sun Aug 15, 2021 8:03 pm
by Poptop320 • | 2.638 Posts

My old 1994 Puck had an external 240v socket. It is under the white flap

pictures_u381_fb3cad.jpg - Bild entfernt (keine Rechte)

When I go on holiday I like to pop my top!
likes this post!
Scroll up
replyreply

#5

RE: Where to put external socket on puck?

in Improving your pride and joy and how to fix things Mon Aug 16, 2021 10:27 am
by mr_underhill (deleted)
avatar

There is no frame diagram as such, but as one who has modified his Puck, you need a strong magnet to find the framework. Look at the van logically and there are pictures on eribafolk.com to look at as well. I fitted 3 external locker doors and only had one mishap, I cut a rear light cable as it went diagonally.

Tardis II , Eriba Puck 1990 pushing a Fiat 500 Colour Therapy, Twin Air Turbo.
One man and his dog.. retired 🐶
likes this post!
Scroll up
replyreply

#6

RE: Where to put external socket on puck?

in Improving your pride and joy and how to fix things Mon Aug 16, 2021 10:37 am
by Paull (deleted)
avatar

Thanks, that's where I wanted to put it.


Scroll up
replyreply

« Roof catch thingy
Gas bottles »

Visitors
3 Members and 246 Guests are online.

Board Statistics
The forum has 12948 topics and 108330 posts.


disconnected Forum-Chat Members online 3