 ERIBAFOLK POP UP EVERYWHERE |
|
Mines a 2004 thats when they new how to make them
hooked mine up on gravel this morning at Damage Barton and unhooked and man handled it on gravel at our home, no pro lems encountered and certainly no lean or deflection as for extrapulation, lets just say I don't need viagra
replyRE: Fitting a new jockey wheel and clamp.
in Improving your pride and joy and how to fix things Wed Jul 02, 2014 6:40 pmby Aaron Calder •
| 3.834 Posts
Forum Administrator
2003 Triton 420 and Audi A4 2.0Tfsi S-line SE Cabriolet
Fitted a new Alko four-bolt clamp plus the Alko Premium jockey wheel today (2013 540). Hopefully the clamp will cure the tendency for the jockey wheel tube to adopt severe angles of lean!
Keith
2013 540GT & Honda CR-V 2.2 iDTEC ES-T
Emile the (less than perfect but still loveable) Eriba
RE: Fitting a new jockey wheel and clamp.
in Improving your pride and joy and how to fix things Tue Jul 29, 2014 6:30 pmby Randa france •
| 13.283 Posts
1999 Eriba Troll 530 pushing a VW Touran 2L TDi Match 
RE: Fitting a new jockey wheel and clamp.
in Improving your pride and joy and how to fix things Wed Jul 30, 2014 12:19 amby Randa france •
| 13.283 Posts
I was wondering if Eribas with motor movers are more likely to have jockey wheel problems? 
My reasoning is that for non-mover vans like ours, we are obliged to manoeuver the van using the car. Because of the weight on the van there is little prospect of pushing it too far with its jockey wheel down.
However we often see vans with movers being unhitched on the roadway and positioned on the emplacement using the mover, often climbing raised curbs etc.
Randa
1999 Eriba Troll 530 pushing a VW Touran 2L TDi Match
RE: Fitting a new jockey wheel and clamp.
in Improving your pride and joy and how to fix things Wed Jul 30, 2014 12:24 amby Randa france •
| 13.283 Posts
'Yeh but you're fit and 30 something '
oo thanks for compliment 
but your both fit too, cycling up mountains on jollys in heat.
not so fit here, but recently carried 400 litres water but water in water can in many journeys grrr (why wont it rain on a night..).
Eriba troll 540 likes constant hugs, and buffs and the odd cuppa.
Quote: Randa france wrote in post #24
I was wondering if Eribas with motor movers are more likely to have jockey wheel problems?
Randa
Thats my belief to, and because I move by hand I always ensure the jockey wheel is facing the right way to allow me to push or pull the van without encountering yet more resistance
I also find it less difficult to manouvre with a solid wheelLike to wax and have a smooth finish
Quote: Randa france wrote in post #24
I was wondering if Eribas with motor movers are more likely to have jockey wheel problems?
Can't answer for Keith obviously, but we don't have a mover fitted to our van (Triton 430) and the picture shows the appearance of the Jockey Wheel before even taking delivery of it. It should be noted, however, the state of the ground over which the van is being moved allowing the wheel to sink in somewhat. This obviously adds to the strain/force being placed on the wheel which under normal everyday use probably wouldn't happen. However, I considered the risk of something breaking whilst manouvering on site to be too great and so for the cost of a 4-bolt clamp decided not to take it. By the way, the entire Jockey Wheel assembly was changed by the dealer before our collecting the van but not the clamp which remained the 2-bolt system.
The problem is, and again I reiterate that the ground as shown in the image has not helped the situation any, that with the 2-bolts situated centrally in the clamp this allows for a slight pivotting during movement of the van. It doesn't have to be a great movement - something in the order of 1 degree but when extrapolated along the entire length of the Jockey Wheel shows a fair amount of deflection. With 4-bolts fitted as shown in Keith's image above the clamps surface and mating surface are held firmly together along the entire length of the clamp thereby no movement/pivotting is able to take place.
This obviously doesn't affect all vans otherwise we'd have heard more about the problem and I guess this is as a result of a number of things: weight of van, distribution of weight i.e. nose heavy and type of ground to name but few. That said, I would hesitate to guess that this could possibly affect all vans at sometime or other depending on the type of ground upon which they are camping i.e. how much strain is placed on the Jockey Wheel as a result of the ground conditions. If the wheel is allowed to rotate freely without any hinderance of course the resistance is going to be very low and no deflection should be evident.
2014-07-30_072853.jpg - Bild entfernt (keine Rechte)
2013 Triton 430, VW Touran TDI BM
мы прибываем невидимые - we arrive invisibleMy You Tube Channel
good grief the jockey wheel been 
merry.. wonder if the attachment has actually been welded slightly off the 4 bolt takes up the error, going to ponder over a cuppa
pleased to say mine not like that, even with blocking tyres side to side off blocks at axle wheels (to get her up hill) jockey doesn't distort to such an angle.
(considered one of those tanks to go under hitch but its a lot of money unless can attach lawn mower now there's a thought 
)
Eriba troll 540 likes constant hugs, and buffs and the odd cuppa.
 Visitors
1 Member and 150 Guests are online. |
 Board Statistics
The forum has 12890
topics
and
108059
posts.
|
Forum-Chat
1
