My tap micro switch has broken and I can't take tap apart to change it. So new tap needed but not very many that use just cold water. Have already purchased a Reiche tap but the spigot is too short to go through the bathroom worktop, (tap spigot 200mm worktop 300mm). Does anyone know if you can use a mixer tap with only the cold water attached, or would water come out of the hot side when the tap is turned on. Could the hot side be plugged if so what would you plug it with? I would very much appreciate anyones views on how to get around this problem or any advice on which tap to buy.

Not mastered photo's yet as I am a newbie, not managed to be able to do quotes like yours either. But tap is well mangled from my trying to prize it apart.

is this the one you purchased?

https://www.leisureshopdirect.com/water/...kel-with-switch
this is cold only there is a diagram giving dimensions

also this one
https://www.leisureshopdirect.com/water/...cold-water-only
am sure other suppliers avaliable

P

[quote="Pop540"|p31434]is this the one you purchased?

https://www.leisureshopdirect.com/water/...kel-with-switch
this is cold only there is a diagram giving dimensions

also this one
https://www.leisureshopdirect.com/water/...cold-water-only
am sure other suppliers avaliable






No it was neither of these it was a Riech de lux, but like I said the spigot was too short to go through the worktop.

When all else fails telephone Jandi and tell them your problem and the model and year of the van


click link
http://www.eribacaravans.co.uk/

Funny enough my cold only tap started leaking from the back under the sink, I got a replacement from Jandi £56 ish. as to using a mixer, yes you can, on the water pipe somewhere before the tap fit a Y piece and 2 pipes to the tap, that way no leaks and no matter which you turn the lever you get cold water.
Dave