Page 1 of 6 « previous Page 1 2 3 4 5 6 next Page »

#1

Machine polishing

in Anything Eriba-related Tue Jul 15, 2014 7:46 pm
by Agger (deleted)
avatar

Some of you know I like a clean and tidy van. We use our van regularly but I lke to keep it looking good. I have machine polished the roof before but that was with a cheap Aldi or Lidl random orbital polisher. They are ok but you have no control over speed and if you apply downforce the motor slows and gets very hot.

Back in May it was my birthday and my wife Mrs Agger asked if I would like a "proper" polisher so I found one on EBay and we bought it, it came complete with lots of pads (15) in different colours and compounds. Yesterday I used it for the first time on the roof I can only say I was blown away by the results. Mine is a straight polisher, no orbital or random orbits. I used Meguiars polish (I usually "cut" with other makes). I started at the front on the lower roof, and in sections of about 2 metres I ran the polisher back and forth and up and down at a slow speed to start (to stop "spin off" of the polish due to centrifugal force). I then just wiped the polish off with a couple of microfibre cloths, once I had finished the polish of the lower roof I applied a coat of Harly wax to seal in the finish.

I have yet to attack the upper roof, but I am looking forward to it, knowing how easy it is. I am hoping to do this Thursday (weather permitting) so I will post some more pictures, before, during and after and also the polisher and associated bits

Attached pictures:
No rights to view attachments. Only file names are shown. Register now!
 20140714_105728.jpg 


, Poptop320 and like this post!
Last edited Tue Jul 15, 2014 9:11 pm | Scroll up

#2

RE: Machine polishing

in Anything Eriba-related Thu Jul 17, 2014 3:19 pm
by Agger (deleted)
avatar

This morning I dried the upper roof off and at a decent time 9 o clock I started to cut and polish it however due to bright sun I was unable to get any decent photo's

Tomorrow morning I plan to wax it to seal in the shine sohopefully I can post some then, needless to say I am extremely happy with it

My bits will be in at Jandi very soon so as soon as it is all done I will post more photo's.


Scroll up

#3

RE: Machine polishing

in Anything Eriba-related Thu Jul 17, 2014 5:03 pm
by Pop540 (deleted)
avatar

Hi Agger just wondered if you could share
-any tips what to stand or lean on / against?,
- how do you cope with electric wire catching body
-how long has it taken to do with the electric do dah roughly
-is it ok to cut & polish in full sun
many thanks for taking time to answer
P


Eriba troll 540 likes constant hugs, and buffs and the odd cuppa.

Scroll up

#4

RE: Machine polishing

in Anything Eriba-related Thu Jul 17, 2014 6:17 pm
by Agger (deleted)
avatar

No problem in order,

I use a large step ladder (like an easel, but with steps, it's about 10 high (sorry don't know how long) and very stable

Electric cable goes over my shoulder, like you would if you cut grass electrically

Took me less than an hour (honestly) but I know what I'm doing and have done it before

I would'nt recommend cutting or polishing in full sun BUT sometimes needs must (waxing especially with Harly I'd wax in full sun no problem) polish can stick aggresivly to the paint (easy enough to remove with more polish)

I would just add it is important to move the polisher and not let it sit in one position, you can move it slowly and vary the speed by press button + or - on a digital display, it also has a slow start so you don't spin off the polish / wax. I used 2 slow passes then a high speed one both left and right and up and down

The result is amazing and I'm well pleased with the polisher despite people saying to go for a random orbital I did'nt mine is a straight drive like an angle grinder. The polisher cost £78 on Ebay from Tectake in Germany and came with 15 assorted polishing pads



likes this post!
Last edited Thu Jul 17, 2014 8:41 pm | Scroll up

#5

RE: Machine polishing

in Anything Eriba-related Thu Jul 17, 2014 8:29 pm
by Deeps (deleted)
avatar

Quote: Agger wrote in post #4
The polisher cost £78 on Ebay from Tectake in Germany and came with 15 assorted polishing pads


So which one of these was it then?

http://www.tectake.de/auto-und-motorrad/...poliermaschinen


2013 Triton 430, VW Touran TDI BM
мы прибываем невидимые - we arrive invisible

My You Tube Channel


Last edited Tue Aug 01, 2017 10:58 am | Scroll up

#6

RE: Machine polishing

in Anything Eriba-related Thu Jul 17, 2014 8:34 pm
by Agger (deleted)
avatar

It looks like the first one on the second row. Mine has a 7 inch set of pads and another at 5 inch, I use the squeegee on the house windows



likes this post!
Last edited Thu Jul 17, 2014 8:34 pm | Scroll up

#7

RE: Machine polishing

in Anything Eriba-related Fri Jul 18, 2014 6:34 am
by Agger (deleted)
avatar

Got your sunglasses started to dry it at about 0510 and finished everything away at 0630 while the rest of you were getting some much needed beauty sleep

The first picture shows my ladder

subsequent pictures show the rain on the roof after yesterdays polish and last nights thunderstorms, I put a photo on off the wax on the roof and the area that I deal with is about 1m sq.

Attached pictures:
No rights to view attachments. Only file names are shown. Register now!
 20140718_051739.jpg 
 20140718_051837.jpg 
 20140718_052907.jpg 
 20140718_053609.jpg 
 20140718_063008(0).jpg 


likes this post!
Last edited Fri Jul 18, 2014 6:55 am | Scroll up

#8

RE: Machine polishing

in Anything Eriba-related Fri Jul 18, 2014 7:48 am
by ellen (deleted)
avatar

Wow, I love the finish, possible silly question but I wonder if you can buy one with a recharble battery? No plug in where we store doo-dah. Thanks for the info Graham.


Proud owners of Doo-Dah our Familia 310
likes this post!
Scroll up

#9

RE: Machine polishing

in Anything Eriba-related Fri Jul 18, 2014 7:55 am
by Agger (deleted)
avatar

Quote: ellen wrote in post #8
Wow, I love the finish, possible silly question but I wonder if you can buy one with a recharble battery? No plug in where we store doo-dah. Thanks for the info Graham.


You can get them with a rechargeable battery but I wonder how long it would last as you need to apply pressure when cutting, the fine polishing is easier, and the wax I apply by hand and polish it off the same. If you can get doo dah to your house it could easily be done in a morning from cutting, fine polishing and then waxing


Scroll up

#10

RE: Machine polishing

in Anything Eriba-related Fri Jul 18, 2014 8:42 am
by ellen (deleted)
avatar

That's our greatest problem as we would so dearly loved to be able to get him here but we live at the end of a cul de sac and our kind neighbours double park even on a sharp bend. To have Doo-Dah live at home is our ambition but that would mean a house move, hopefully in the not too distant future. Ellen.


Proud owners of Doo-Dah our Familia 310
Scroll up

#11

RE: Machine polishing

in Anything Eriba-related Fri Jul 18, 2014 9:05 am
by Aaron Calder | 3.834 Posts

From what I saw of Doo-Dah recently, Ellen, he is more than shiny enough as he is and, more importantly, you and Mark, unlike Agger, actually have lives!

Beware the 'detailing' approach to car and caravan cleaning. They are all obsessives. A more forthright person would say 'nutters' - but not me.


Forum Administrator
2003 Triton 420 and Audi A4 2.0Tfsi S-line SE Cabriolet
Scroll up

#12

RE: Machine polishing

in Anything Eriba-related Fri Jul 18, 2014 9:12 am
by Randa france | 13.287 Posts

Zitat
Quote Aaron Calder:- A more forthright person would say 'nutters' - but not me.


Oh! Doughnuts......I see trouble brewing.......FIGHT !!!!


1999 Eriba Troll 530 pushing a VW Touran 2L TDi Match


likes this post!
Last edited Sun Nov 16, 2014 10:30 am | Scroll up

#13

RE: Machine polishing

in Anything Eriba-related Fri Jul 18, 2014 9:15 am
by Aaron Calder | 3.834 Posts

Did you see the shine on those doughnuts?


Forum Administrator
2003 Triton 420 and Audi A4 2.0Tfsi S-line SE Cabriolet
Scroll up

#14

RE: Machine polishing

in Anything Eriba-related Fri Jul 18, 2014 10:57 am
by ellen (deleted)
avatar

Maybe it's a good job that Doo-Dah isn't at home or i could quite easily polish him to death but, our favourite pastime has to be spending time with him.


Proud owners of Doo-Dah our Familia 310
Scroll up

#15

RE: Machine polishing

in Anything Eriba-related Fri Jul 18, 2014 4:30 pm
by Agger (deleted)
avatar

Quote: Aaron Calder wrote in post #13
Did you see the shine on those doughnuts?


I covered them with Dr Aggers special elixer


Scroll up

Page 1 of 6 « previous Page 1 2 3 4 5 6 next Page »

Visitors
1 Member and 83 Guests are online.

Board Statistics
The forum has 12892 topics and 108084 posts.



disconnected Forum-Chat Members online 1